AMPCO Non-Sparking Double-Sided Aligning Punch
The AMPCO Drift Pin is a non-sparking, double-sided aligning punch with a hexagon shank width of 1 3/16 in and a tip size of 11/16 in. Made from aluminum bronze, this flat-tip punch is designed for safe use in…
SKU 3G-OTH-631188
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The AMPCO Drift Pin is a non-sparking, double-sided aligning punch with a hexagon shank width of 1 3/16 in and a tip size of 11/16 in. Made from aluminum bronze, this flat-tip punch is designed for safe use in hazardous environments. 3G Electric interprets your demand for specialty industrial tools, sourcing and supporting this genuine AMPCO D-5 across our 14 departments, with specialist depth in combustion, pumps, and controls.
Frequently Asked Questions
What is the AMPCO D-5 drift pin used for?
The AMPCO D-5 drift pin is a non-sparking, double-sided aligning punch used to align bolt holes or drive out pins in hazardous environments where sparks could ignite flammable gases or dust. Its aluminum bronze construction ensures safe operation in refineries, chemical plants, and grain facilities.
What are the specifications of the AMPCO D-5 drift pin?
The AMPCO D-5 drift pin has a hexagon shank width of 1 3/16 in, a tip size of 11/16 in, and a flat tip. It is made from aluminum bronze, is non-sparking, and has a hexagon barrel type. The manufacturer part number is D-5.
Where to buy the AMPCO D-5 drift pin worldwide?
3G Electric supplies the genuine AMPCO D-5 drift pin worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source this non-sparking punch across our 14 departments, including specialist expertise in combustion, pumps, and controls.
How to select the right non-sparking drift pin for hazardous areas?
Select a non-sparking drift pin like the AMPCO D-5 by matching tip size to the hole diameter and shank width to the hammer face. Ensure the material is aluminum bronze or beryllium copper for spark resistance. For the D-5, use an 11/16 in tip and a 1 3/16 in hex shank.
Used in
Common applications for AMPCOAMPCO Products
3G Electric supplies AMPCO non-sparking double-sided aligning punches. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.