ACCUFORM Arc Flash Hazard Warning Sign, 5 in x 7 in, Adhesive Vinyl, LELC387
The ACCUFORM Arc Flash Label (MPN LELC387) is a 5 in x 7 in vinyl warning sign with adhesive mounting, not retroreflective and not glow-in-the-dark. It displays the message 'Warning: Arc Flash Hazard Appropriate PPE…
SKU 3G-OTH-702930
Also listed as: LELC 387 · LELC-387
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The ACCUFORM Arc Flash Label (MPN LELC387) is a 5 in x 7 in vinyl warning sign with adhesive mounting, not retroreflective and not glow-in-the-dark. It displays the message 'Warning: Arc Flash Hazard Appropriate PPE Required Do Not Operate Controls Or Open Covers Without Appropriate Personal Protection Equipment. Failure To Comply May Result In Injury Or Death! Refer To NFPA 70E For Minimum Requirements.' 3G Electric interprets demand and delivers this label across 14 industrial departments — and we supply far more than is listed — with specialist depth in electrical safety products as an authorised distributor.
Frequently Asked Questions
What is the ACCUFORM Arc Flash Label LELC387 used for?
This 5 in x 7 in vinyl label warns personnel of arc flash hazards and specifies required PPE per NFPA 70E. It is applied to electrical panels, switchgear, and control cabinets in industrial facilities to meet safety signage requirements and reduce injury risk.
What are the specifications of the ACCUFORM Arc Flash Label LELC387?
The label has a nominal size of 5 in x 7 in, adhesive mounting, vinyl material, and is not retroreflective or glow-in-the-dark. It displays the arc flash warning message referencing NFPA 70E. The manufacturer part number is LELC387.
Where to buy ACCUFORM Arc Flash Label LELC387 worldwide?
3G Electric supplies the ACCUFORM Arc Flash Label LELC387 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to order this electrical safety label for your facility.
How to install the ACCUFORM Arc Flash Label LELC387?
Clean the application surface thoroughly to remove dust and grease. Peel the backing from the adhesive label and press firmly onto the panel or enclosure. Ensure the label is placed in a visible location near the hazard per NFPA 70E guidelines.
Used in
Common applications for ACCUFORMACCUFORM Products
3G Electric supplies ACCUFORM warning: arc flash hazard appropriate ppe required do not operate controls or open covers without appropriate personal protection equipment. failure to comply may result in injury or death! refer to nfpa 70e for minimum requirements signs. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- Fireye Flame-Monitor E300 Expansion Module. The E300 expansion module provides operational information and reduces troubleshooting time and expense. It expands the standard display messages of the Fireye Flame-Monitor to identify the specific limit in the operating control circuit or running interlock circuit which caused the burner shutdown or lockout — E300
- Fireye Flame-Monitor E320 Expansion Module. The E320 expansion module provides operational information and reduces troubleshooting time and expense. It expands the standard display messages of the Fireye Flame-Monitor to identify the specific limit in the operating control circuit or running interlock circuit which caused the burner shutdown or lockout — E320
- Fireye BurnerLogix YZ300 Annunciator. The YZ300 Module shall interface with the Fireye YB110 or ZB110 BurnerLogix and expand on the YB110 or ZB110 annunciation capabilities — YZ300
- Fireye Flame-Monitor E120 Flame Safeguard. The Fireye® E120 Flame-Monitor™ System is specifically designed for applications requiring 220VAC power. It provides the same advanced burner management features as the E110 Flame-Monitor, with added compatibility for 220VAC power sources — E120
- FLAME GARD This fire-rated flat access door is designed for rectangular duct systems, providing access for inspection and maintenance. Constructed from 16-gauge steel with thumbscrews for secure closure, it is rated for a maximum temperature of 2,300°F, suitable for high-heat HVAC and industrial exhaust applications