3M T Tap Wire Connector, 22-18 AWG, 600V, Red, 1 Port
The 3M Insulation Displacement Connector is a 1-port T Tap Wire Connector (SKU 3G-OTH-17540) designed for 22 AWG to 18 AWG run size range and rated at 600 V. This red connector is not moisture resistant and is…
SKU 3G-OTH-17540
Also listed as: 951COLABEL · 951 CO LABEL · 951-CO-LABEL
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The 3M Insulation Displacement Connector is a 1-port T Tap Wire Connector (SKU 3G-OTH-17540) designed for 22 AWG to 18 AWG run size range and rated at 600 V. This red connector is not moisture resistant and is manufactured under part number 951 CO-LABEL.
Frequently Asked Questions
What is the 3M Insulation Displacement Connector used for?
The 3M Insulation Displacement Connector (MPN 951 CO-LABEL) is a T Tap Wire Connector used to tap into an existing wire run without stripping insulation. It is ideal for low-voltage control circuits, lighting, and signal wiring in industrial and commercial installations where quick, reliable connections are needed.
What are the specifications of the 3M Insulation Displacement Connector?
This 3M connector is a 1-port T Tap Wire Connector rated at 600 V. It accepts a run wire size of 22 AWG to 18 AWG. The connector is red and is not moisture resistant. The manufacturer part number is 951 CO-LABEL, and the SKU is 3G-OTH-17540.
Where to buy the 3M Insulation Displacement Connector worldwide?
3G Electric supplies the 3M Insulation Displacement Connector (951 CO-LABEL) worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this connector for your project.
How to install the 3M Insulation Displacement Connector?
To install the 3M Insulation Displacement Connector, insert the run wire into the connector slot and the tap wire into the opposite port. Use a standard pair of pliers to press the cap down until it snaps, piercing the insulation and making contact. Ensure the wire is fully seated before crimping.
Used in
Common applications for 3M3M Products
3G Electric supplies 3M t tap wire connectors. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
