EXW Singapore — collect or forward from our Singapore office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

WESTWARD D5

Westward is a brand of industrial tools and equipment distributed by OEM, a broad-line supplier of maintenance, repair, and operations (MRO) products. The Westward line includes hand tools, power tools, and replacement parts for those tools. The D5 designation refers to a family of power tool replacement components, specifically bottom fittings and tapers used with compatible Westward power tool models. These parts are not complete tools; they are spares that maintain or restore function in existing equipment. The D5 parts shown here are associated with the 1PZ38 model, a Westward power tool platform. The components carry metric thread specifications: M6x1, M11x1-1/2, and similar. Thread size and pitch are critical for proper fit and load transfer in the tool assembly. The bottom fitting, for example, serves as a structural or connection point at the base of the tool or accessory interface. The taper component is used for mounting accessories, such as chucks, arbors, or tool holders, that rely on a tapered interface for alignment and torque transmission. These parts are manufactured to Westward's specifications and are identified by manufacturer part numbers (MPNs) such as 311-4203, 311-4321, and 311-4323. The MPN is the primary reference for ordering, as it uniquely identifies the part regardless of the distributor. 3G Electric supplies Westward D5 power tool parts as part of its broader catalog of industrial equipment and components. The company serves plant engineers, maintenance managers, and procurement specialists who need to source replacement parts for existing Westward tools. 3G Electric maintains inventory and logistics support for multiple SKUs within the D5 family, allowing buyers to consolidate purchases and reduce downtime. The product data provided for each SKU includes the MPN, thread specification, and compatible model, which supports accurate cross-referencing and verification before order placement. For technical buyers, the key considerations when selecting a Westward D5 part are the thread size and pitch, the compatible tool model, and the specific function of the component (bottom, taper, etc.). These attributes determine whether the part will fit and perform as intended. 3G Electric provides this information at the SKU level so that procurement and maintenance teams can match parts to their equipment without ambiguity. The D5 parts are typically used in machining, maintenance, and assembly applications where Westward power tools are deployed. Because these are replacement components, they are often purchased in small quantities to address wear or damage, rather than as part of new equipment builds. 3G Electric supports both one-off and repeat orders, with global shipping to industrial facilities. The company does not manufacture these parts; it distributes them as part of its role as an industrial-equipment distributor. All technical specifications are as provided by the manufacturer or inferred from the part numbering and thread callouts. Buyers should verify compatibility with their specific tool model and serial number where applicable. For current availability, lead time, and pricing, contact 3G Electric with the MPN or SKU.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
EXW Singapore
Collect or forward from our office
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Show
Page 1 of 1

About WESTWARD D5

Westward is a brand of industrial tools and equipment distributed by OEM, a broad-line supplier of maintenance, repair, and operations (MRO) products. The Westward line includes hand tools, power tools, and replacement parts for those tools. The D5 designation refers to a family of power tool replacement components, specifically bottom fittings and tapers used with compatible Westward power tool models. These parts are not complete tools; they are spares that maintain or restore function in existing equipment. The D5 parts shown here are associated with the 1PZ38 model, a Westward power tool platform. The components carry metric thread specifications: M6x1, M11x1-1/2, and similar. Thread size and pitch are critical for proper fit and load transfer in the tool assembly. The bottom fitting, for example, serves as a structural or connection point at the base of the tool or accessory interface. The taper component is used for mounting accessories, such as chucks, arbors, or tool holders, that rely on a tapered interface for alignment and torque transmission. These parts are manufactured to Westward's specifications and are identified by manufacturer part numbers (MPNs) such as 311-4203, 311-4321, and 311-4323. The MPN is the primary reference for ordering, as it uniquely identifies the part regardless of the distributor. 3G Electric supplies Westward D5 power tool parts as part of its broader catalog of industrial equipment and components. The company serves plant engineers, maintenance managers, and procurement specialists who need to source replacement parts for existing Westward tools. 3G Electric maintains inventory and logistics support for multiple SKUs within the D5 family, allowing buyers to consolidate purchases and reduce downtime. The product data provided for each SKU includes the MPN, thread specification, and compatible model, which supports accurate cross-referencing and verification before order placement. For technical buyers, the key considerations when selecting a Westward D5 part are the thread size and pitch, the compatible tool model, and the specific function of the component (bottom, taper, etc.). These attributes determine whether the part will fit and perform as intended. 3G Electric provides this information at the SKU level so that procurement and maintenance teams can match parts to their equipment without ambiguity. The D5 parts are typically used in machining, maintenance, and assembly applications where Westward power tools are deployed. Because these are replacement components, they are often purchased in small quantities to address wear or damage, rather than as part of new equipment builds. 3G Electric supports both one-off and repeat orders, with global shipping to industrial facilities. The company does not manufacture these parts; it distributes them as part of its role as an industrial-equipment distributor. All technical specifications are as provided by the manufacturer or inferred from the part numbering and thread callouts. Buyers should verify compatibility with their specific tool model and serial number where applicable. For current availability, lead time, and pricing, contact 3G Electric with the MPN or SKU.

Common Applications

  • Machining — WESTWARD D5 Taper (MPN 311-4321) used to mount accessories on 1PZ38 power tools in machining setups.
  • Maintenance and repair — WESTWARD D5 Bottom (MPN 311-4203 or 311-4323) replaces worn or damaged bottom fittings on 1PZ38 tools.
  • Assembly operations — WESTWARD D5 Taper (MPN 311-4321) provides a secure interface for tool holders or chucks on compatible power tools.
  • Equipment refurbishment — WESTWARD D5 Bottom (MPN 311-4323) restores the base connection on 1PZ38 tools during overhaul.
  • General industrial — WESTWARD D5 power tool parts maintain functionality of Westward 1PZ38 tools in plant environments.
  • MRO procurement — Multiple WESTWARD D5 SKUs (311-4203, 311-4321, 311-4323) stocked for scheduled and unscheduled maintenance.

Frequently asked questions

Common questions about WESTWARD D5 from 3G Electric.

What is the difference between the WESTWARD D5 Bottom and the WESTWARD D5 Taper?

The WESTWARD D5 Bottom is a replacement component that serves as a bottom fitting for compatible power tools, such as the 1PZ38 model. It is available with different thread sizes, including M6x1 and M11x1-1/2. The WESTWARD D5 Taper is a replacement part with a tapered interface, used for mounting accessories in compatible equipment. It carries an M11x1-1/2 thread specification. Both are power tool parts, but they perform different functions: the bottom is a base or connection component, while the taper is used for accessory mounting. The correct part depends on the specific tool model and the interface being repaired or replaced. Always verify the MPN and thread size against your equipment requirements.

Which Westward power tool model is compatible with the D5 parts listed?

The WESTWARD D5 Bottom (M6x1, MPN 311-4203), WESTWARD D5 Taper (M11x1-1/2, MPN 311-4321), and WESTWARD D5 Bottom (M11x1-1/2, MPN 311-4323) are all designed for use with the 1PZ38 model. This model number is the primary compatibility reference for these SKUs. If you are unsure whether your tool is the 1PZ38, check the tool's nameplate or documentation. Using a part with the wrong thread or interface can damage the tool or the part. 3G Electric can provide the MPN and thread specification for each SKU to help you confirm fit before ordering.

What thread sizes are available for the WESTWARD D5 Bottom?

The WESTWARD D5 Bottom is available in at least two thread sizes: M6x1 and M11x1-1/2. The M6x1 version is identified by MPN 311-4203, and the M11x1-1/2 version is identified by MPN 311-4323. Both are designed for use with the 1PZ38 model. Thread size and pitch are critical for proper assembly and load capacity. M6x1 indicates a metric thread with a 6 mm nominal diameter and a 1 mm pitch. M11x1-1/2 indicates an 11 mm nominal diameter and a 1.5 mm pitch (the 1-1/2 notation is a common way to express 1.5 mm pitch in some catalogs). Confirm the required thread against your tool's mating component.

Are WESTWARD D5 power tool parts original manufacturer parts?

Westward is a brand owned by OEM, and the D5 parts are manufactured to Westward specifications. They are not generic or aftermarket parts; they carry Westward manufacturer part numbers (MPNs) such as 311-4203, 311-4321, and 311-4323. 3G Electric distributes these parts as an industrial-equipment distributor. The parts are intended for use with compatible Westward tools, specifically the 1PZ38 model for the SKUs shown. For critical applications, always verify that the MPN matches the part you are replacing. If you need a part that is no longer in production, contact 3G Electric to check availability or discuss alternatives.

Can 3G Electric supply WESTWARD D5 parts outside Singapore?

Yes. 3G Electric is a Singapore-headquartered industrial-equipment distributor with global reach. The company ships Westward D5 power tool parts and other industrial equipment to customers worldwide. Logistics support includes export documentation and coordination with freight forwarders as needed. Lead times and shipping costs depend on the destination, part availability, and order size. For international orders, provide the MPN or SKU, quantity, and delivery address to receive a quote. 3G Electric does not restrict sales to any specific geographic region.

How do I identify the correct WESTWARD D5 replacement part for my tool?

Start with the tool model number, such as 1PZ38, and the function of the part you need (bottom, taper, etc.). Then match the thread specification: M6x1 or M11x1-1/2 for the D5 Bottom, and M11x1-1/2 for the D5 Taper. The manufacturer part number (MPN) is the most precise identifier: 311-4203 for the M6x1 bottom, 311-4321 for the M11x1-1/2 taper, and 311-4323 for the M11x1-1/2 bottom. If you have the old part, check for stamped numbers or measure the thread with a pitch gauge. When in doubt, provide the tool model and a description of the part to 3G Electric for cross-reference.