We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

WELD AID

WELD AID is a brand of welding consumables and accessories focused on spatter-control chemistry. The line is built around three functional categories: solvent-based antispatter, water-based antispatter, and nozzle tip dips. These products are applied to MIG and TIG nozzles, contact tips, gas cups, workpieces, and fixtures before or during welding to prevent molten spatter from adhering to surfaces. The result is reduced cleanup time, maintained gas flow through the nozzle, and extended service life of consumables such as nozzles and contact tips. WELD AID products are supplied in aerosol cans and dip containers, with formulations available in flammable and non-flammable variants. The range includes series such as Nozzle-Kleen #3, Weld-Kleen HD2, Weld-Kleen 350 AP, and Nozzle-Dip HD. Solvent-based products are typically used where fast evaporation and strong spatter release are required, while water-based products are chosen for lower flammability and reduced solvent exposure. Nozzle tip dips are applied by dipping the nozzle or tip directly into the container, providing a coating that resists spatter accumulation. These products are used in fabrication, maintenance, and repair welding across industries that rely on MIG, TIG, and stick processes. 3G Electric supplies the WELD AID line as part of its industrial equipment and consumables catalog. The catalog includes aerosol antispatter in sizes such as 12 oz, 13.75 oz, and 14 oz, as well as 32 oz nozzle tip dip containers. Each product is listed with its series name and manufacturer part number to support accurate specification and reordering. 3G Electric serves plant engineers, maintenance managers, and procurement specialists who need to source welding consumables alongside other industrial equipment. The WELD AID range addresses common welding pain points: spatter adhesion on nozzles and workpieces, inconsistent gas flow, and frequent consumable replacement. By selecting the appropriate formulation—solvent-based, water-based, or dip—users can match the product to their process requirements, ventilation conditions, and surface compatibility needs. 3G Electric provides global logistics support for the WELD AID line, allowing buyers to consolidate welding consumables with other equipment purchases. The catalog structure includes series and part number references, enabling cross-referencing with existing inventory or maintenance schedules. For technical buyers, the key selection criteria are formulation type, container size, and application method. Solvent-based antispatter is typically applied as a spray before welding, while nozzle tip dips are used by immersing the nozzle or tip. Water-based antispatter offers an alternative where solvent use is restricted or where a less aggressive chemistry is preferred. All products are intended for industrial welding environments and should be used according to the manufacturer's instructions and site safety protocols. 3G Electric maintains the WELD AID line as a stocked category, with product data organized by series and MPN to facilitate repeat orders and specification matching.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 1 of 1

About WELD AID

WELD AID is a brand of welding consumables and accessories focused on spatter-control chemistry. The line is built around three functional categories: solvent-based antispatter, water-based antispatter, and nozzle tip dips. These products are applied to MIG and TIG nozzles, contact tips, gas cups, workpieces, and fixtures before or during welding to prevent molten spatter from adhering to surfaces. The result is reduced cleanup time, maintained gas flow through the nozzle, and extended service life of consumables such as nozzles and contact tips. WELD AID products are supplied in aerosol cans and dip containers, with formulations available in flammable and non-flammable variants. The range includes series such as Nozzle-Kleen #3, Weld-Kleen HD2, Weld-Kleen 350 AP, and Nozzle-Dip HD. Solvent-based products are typically used where fast evaporation and strong spatter release are required, while water-based products are chosen for lower flammability and reduced solvent exposure. Nozzle tip dips are applied by dipping the nozzle or tip directly into the container, providing a coating that resists spatter accumulation. These products are used in fabrication, maintenance, and repair welding across industries that rely on MIG, TIG, and stick processes. 3G Electric supplies the WELD AID line as part of its industrial equipment and consumables catalog. The catalog includes aerosol antispatter in sizes such as 12 oz, 13.75 oz, and 14 oz, as well as 32 oz nozzle tip dip containers. Each product is listed with its series name and manufacturer part number to support accurate specification and reordering. 3G Electric serves plant engineers, maintenance managers, and procurement specialists who need to source welding consumables alongside other industrial equipment. The WELD AID range addresses common welding pain points: spatter adhesion on nozzles and workpieces, inconsistent gas flow, and frequent consumable replacement. By selecting the appropriate formulation—solvent-based, water-based, or dip—users can match the product to their process requirements, ventilation conditions, and surface compatibility needs. 3G Electric provides global logistics support for the WELD AID line, allowing buyers to consolidate welding consumables with other equipment purchases. The catalog structure includes series and part number references, enabling cross-referencing with existing inventory or maintenance schedules. For technical buyers, the key selection criteria are formulation type, container size, and application method. Solvent-based antispatter is typically applied as a spray before welding, while nozzle tip dips are used by immersing the nozzle or tip. Water-based antispatter offers an alternative where solvent use is restricted or where a less aggressive chemistry is preferred. All products are intended for industrial welding environments and should be used according to the manufacturer's instructions and site safety protocols. 3G Electric maintains the WELD AID line as a stocked category, with product data organized by series and MPN to facilitate repeat orders and specification matching.

Common Applications

  • Fabrication shops — WELD AID Nozzle-Kleen #3 solvent-based antispatter for MIG and TIG nozzle protection
  • Heavy equipment repair — WELD AID Weld-Kleen HD2 solvent-based antispatter for workpiece and fixture protection
  • MIG welding production lines — WELD AID Nozzle-Dip HD 32 oz nozzle tip dip for consumable life extension
  • General welding — WELD AID Non-Flammable series antispatter for applications requiring reduced flammability
  • Maintenance welding — WELD AID Weld-Kleen 350 AP water-based antispatter for lower solvent exposure

Frequently asked questions

Common questions about WELD AID from 3G Electric.

What is the difference between WELD AID solvent-based and water-based antispatter?

WELD AID solvent-based antispatter, such as Nozzle-Kleen #3 and Weld-Kleen HD2, uses solvent carriers that evaporate quickly and leave a film that resists spatter adhesion. Water-based antispatter, such as Weld-Kleen 350 AP, uses water as the primary carrier, which can reduce flammability and solvent exposure. Solvent-based products are often chosen for heavy spatter conditions and fast drying, while water-based products are selected where solvent use is restricted or where a less aggressive formulation is preferred. Both types are applied before welding to nozzles, workpieces, and fixtures. Selection depends on process requirements, ventilation, and surface compatibility.

How is WELD AID Nozzle-Dip HD applied?

WELD AID Nozzle-Dip HD is a nozzle tip dip supplied in a 32 oz container. It is applied by dipping the MIG nozzle or contact tip directly into the product, coating the surface to reduce spatter adhesion. This helps maintain consistent gas flow and extends consumable life. The dip is typically used as part of a routine maintenance schedule, with reapplication as needed based on spatter buildup. It is intended for MIG welding applications and should be used according to the manufacturer's instructions.

What container sizes are available for WELD AID antispatter?

WELD AID antispatter products are supplied in aerosol cans and dip containers. Aerosol sizes include 12 oz (Nozzle-Kleen #3, Weld-Kleen HD2), 13.75 oz (Weld-Kleen 350 AP), and 14 oz (Non-Flammable series). Nozzle-Dip HD is supplied in a 32 oz container. The appropriate size depends on usage frequency and application method. Aerosol cans are typically used for spray application, while the 32 oz dip container is used for immersion of nozzles or tips.

Are WELD AID antispatter products suitable for TIG welding?

WELD AID antispatter products are formulated for use in MIG and TIG welding, as well as stick welding in some cases. Solvent-based and water-based antispatter can be applied to nozzles, workpieces, and fixtures to prevent spatter adhesion. For TIG welding, where spatter generation is generally lower, antispatter may still be used to protect fixtures and workpieces. Nozzle tip dips are primarily intended for MIG welding nozzles and contact tips. Always verify compatibility with the specific welding process and materials being joined.

What is the purpose of WELD AID Weld-Kleen HD2?

WELD AID Weld-Kleen HD2 is a solvent-based antispatter supplied in a 12 oz aerosol can (MPN 007036). It is applied before welding to prevent weld spatter from adhering to metal surfaces, including nozzles, workpieces, and fixtures. By reducing spatter adhesion, it helps decrease cleanup time and maintain production efficiency. It is part of the Weld-Kleen series and is intended for industrial welding environments. Use according to the manufacturer's instructions and site safety protocols.

Does 3G Electric supply WELD AID products?

Yes — 3G Electric (S) Pte. Ltd. supplies WELD AID products. We stock the WELD AID catalog and supply genuine factory-original products with full manufacturer warranty and technical support.