EXW Singapore — collect or forward from our Singapore office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

SCRUB-WARE

SCRUB-WARE is a manufacturer of stainless steel wash stations and sinks designed for hand-washing and scrubbing in commercial, healthcare, and industrial settings. The product line is organized under the Scrub Sinks series, which includes wall-mounted configurations with one, two, or three stations. These units are specified by bowl dimensions, material gauge, and mounting type, and are available with or without faucets. Common construction uses 16-gauge stainless steel for the bowls, a material selected for durability and resistance to repeated cleaning. The stations are AC powered, which typically indicates integrated electrical components such as lighting or sensor operation, though the exact function depends on the model. Side splashes are not included on the models listed, so wall protection must be specified separately if required. 3G Electric supplies the SCRUB-WARE line to buyers who need documented specifications for procurement and installation. The catalog includes SKU-level detail such as bowl depth, length, and width, overall dimensions, and manufacturer part numbers. This allows plant engineers and maintenance managers to verify fit and function before ordering. For example, the three-station wall-mounted wash station (SKU 45ND43) has three bowls each measuring 11 inches deep, 15 inches long, and 12 inches wide, and includes faucets. The one-station wall-mounted hand sink (SKU 45ND44) has a bowl 22 inches long, 12 inches wide, and 14 3/8 inches deep, also with faucets. Another one-station model (SKU 45ND41) uses a 16-gauge stainless steel bowl with dimensions of 11 inches deep, 14 1/2 inches long, and 9 1/2 inches wide. The two-station hospital sink (SKU 45ND42) is configured for hand washing in healthcare settings, with a single-hole faucet configuration and overall dimensions of 26 inches high, 60 inches long, and 23 inches wide. These products are typically installed in areas where hygiene and durability are priorities, such as operating room scrub areas, laboratory wash-up stations, and industrial hand-washing points. The wall-mounted design saves floor space and simplifies cleaning beneath the unit. Because the stations are AC powered, electrical rough-in must be coordinated with the plumbing rough-in during installation. 3G Electric supports the SCRUB-WARE line by maintaining SKU-level inventory data, providing specification sheets, and assisting with model selection based on bowl size, station count, and faucet requirements. The company ships globally, so buyers outside Singapore can source these units with logistics support. For procurement specialists, the key differentiators among SCRUB-WARE models are the number of stations, bowl dimensions, material gauge, and whether faucets are included. These variables determine the footprint, water supply requirements, and drain placement. The two-station hospital sink, for instance, has a longer overall length (60 inches) to accommodate two users side by side, while the one-station hand sink is more compact for single-user applications. The three-station wash station is suited to higher-traffic areas where multiple users need simultaneous access. All models in the Scrub Sinks series are wall-mounted, which means they require adequate wall structure and blocking for safe installation. The absence of side splashes on the listed models means that adjacent wall surfaces may need additional protection, especially in wet environments. 3G Electric can provide dimensional drawings and installation guidance to help specify the correct model for a given space. The company also offers multiple SKUs within the SCRUB-WARE line, allowing buyers to compare specifications and choose the configuration that matches their requirements. For technical buyers, the availability of manufacturer part numbers (such as 4121ADA-0003 and 4112-SA) simplifies cross-referencing with project specifications and submittal packages. In summary, SCRUB-WARE provides a focused range of stainless steel wash stations and sinks for commercial and healthcare applications, and 3G Electric supplies these products with the specification detail and logistics support needed for global procurement.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
EXW Singapore
Collect or forward from our office
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 1 of 1

About SCRUB-WARE

SCRUB-WARE is a manufacturer of stainless steel wash stations and sinks designed for hand-washing and scrubbing in commercial, healthcare, and industrial settings. The product line is organized under the Scrub Sinks series, which includes wall-mounted configurations with one, two, or three stations. These units are specified by bowl dimensions, material gauge, and mounting type, and are available with or without faucets. Common construction uses 16-gauge stainless steel for the bowls, a material selected for durability and resistance to repeated cleaning. The stations are AC powered, which typically indicates integrated electrical components such as lighting or sensor operation, though the exact function depends on the model. Side splashes are not included on the models listed, so wall protection must be specified separately if required. 3G Electric supplies the SCRUB-WARE line to buyers who need documented specifications for procurement and installation. The catalog includes SKU-level detail such as bowl depth, length, and width, overall dimensions, and manufacturer part numbers. This allows plant engineers and maintenance managers to verify fit and function before ordering. For example, the three-station wall-mounted wash station (SKU 45ND43) has three bowls each measuring 11 inches deep, 15 inches long, and 12 inches wide, and includes faucets. The one-station wall-mounted hand sink (SKU 45ND44) has a bowl 22 inches long, 12 inches wide, and 14 3/8 inches deep, also with faucets. Another one-station model (SKU 45ND41) uses a 16-gauge stainless steel bowl with dimensions of 11 inches deep, 14 1/2 inches long, and 9 1/2 inches wide. The two-station hospital sink (SKU 45ND42) is configured for hand washing in healthcare settings, with a single-hole faucet configuration and overall dimensions of 26 inches high, 60 inches long, and 23 inches wide. These products are typically installed in areas where hygiene and durability are priorities, such as operating room scrub areas, laboratory wash-up stations, and industrial hand-washing points. The wall-mounted design saves floor space and simplifies cleaning beneath the unit. Because the stations are AC powered, electrical rough-in must be coordinated with the plumbing rough-in during installation. 3G Electric supports the SCRUB-WARE line by maintaining SKU-level inventory data, providing specification sheets, and assisting with model selection based on bowl size, station count, and faucet requirements. The company ships globally, so buyers outside Singapore can source these units with logistics support. For procurement specialists, the key differentiators among SCRUB-WARE models are the number of stations, bowl dimensions, material gauge, and whether faucets are included. These variables determine the footprint, water supply requirements, and drain placement. The two-station hospital sink, for instance, has a longer overall length (60 inches) to accommodate two users side by side, while the one-station hand sink is more compact for single-user applications. The three-station wash station is suited to higher-traffic areas where multiple users need simultaneous access. All models in the Scrub Sinks series are wall-mounted, which means they require adequate wall structure and blocking for safe installation. The absence of side splashes on the listed models means that adjacent wall surfaces may need additional protection, especially in wet environments. 3G Electric can provide dimensional drawings and installation guidance to help specify the correct model for a given space. The company also offers multiple SKUs within the SCRUB-WARE line, allowing buyers to compare specifications and choose the configuration that matches their requirements. For technical buyers, the availability of manufacturer part numbers (such as 4121ADA-0003 and 4112-SA) simplifies cross-referencing with project specifications and submittal packages. In summary, SCRUB-WARE provides a focused range of stainless steel wash stations and sinks for commercial and healthcare applications, and 3G Electric supplies these products with the specification detail and logistics support needed for global procurement.

Common Applications

  • Healthcare — SCRUB-WARE two-station hospital sink (SKU 45ND42) for hand washing in operating room scrub areas and clinical settings
  • Industrial — SCRUB-WARE three-station wall-mounted wash station (SKU 45ND43) for high-traffic hand-washing points in manufacturing plants
  • Commercial — SCRUB-WARE one-station hand sink (SKU 45ND44) for hand-washing in food service or janitorial areas
  • Laboratory — SCRUB-WARE one-station hand sink (SKU 45ND41) with 16-gauge stainless steel bowl for wash-up in lab environments
  • Institutional — SCRUB-WARE Scrub Sinks series wall-mounted stations for schools, gyms, or public facilities requiring durable hand-washing fixtures

Frequently asked questions

Common questions about SCRUB-WARE from 3G Electric.

What are the bowl dimensions of the SCRUB-WARE three-station wall-mounted wash station (SKU 45ND43)?

The SCRUB-WARE three-station wall-mounted wash station (SKU 45ND43) has three bowls, each measuring 11 inches deep, 15 inches long, and 12 inches wide. The unit is AC powered and includes faucets. Side splash is not included. This model is part of the Scrub Sinks series and is designed for hand-washing and scrubbing in areas where multiple users need simultaneous access. The wall-mounted configuration saves floor space and simplifies cleaning beneath the unit. When specifying this model, verify that the wall structure can support the weight and that electrical and plumbing rough-ins are coordinated.

Does the SCRUB-WARE one-station hand sink (SKU 45ND44) include a faucet?

Yes, the SCRUB-WARE one-station wall-mounted hand sink (SKU 45ND44) includes a faucet. It is AC powered and has a bowl measuring 22 inches long, 12 inches wide, and 14 3/8 inches deep. Side splash is not included. This model is part of the Scrub Sinks series and is suitable for commercial hand-washing applications. The manufacturer part number is 4121ADA-0003. Because the unit is AC powered, an electrical supply must be provided at the installation location. The wall-mounted design requires adequate blocking or reinforcement.

What material is used in the SCRUB-WARE one-station hand sink (SKU 45ND41)?

The SCRUB-WARE one-station wall-mounted hand sink (SKU 45ND41) features a 16-gauge stainless steel bowl. The bowl dimensions are 11 inches deep, 14 1/2 inches long, and 9 1/2 inches wide. The unit is AC powered and does not include a side splash. It is part of the Scrub Sinks series. 16-gauge stainless steel is commonly specified for commercial wash stations because it resists corrosion and withstands repeated cleaning. This model is suitable for hand-washing in industrial, commercial, or institutional settings where a compact single-station unit is required.

What are the overall dimensions of the SCRUB-WARE two-station hospital sink (SKU 45ND42)?

The SCRUB-WARE two-station hospital sink (SKU 45ND42) has overall dimensions of 26 inches in height, 60 inches in length, and 23 inches in width. It features a single-hole faucet configuration and includes faucets. The manufacturer part number is 4112-SA. This model is designed for hand washing in healthcare settings, where two users may need to scrub simultaneously. The 60-inch length accommodates two stations side by side. Because it is wall-mounted, verify that the wall can support the unit and that plumbing and electrical services are available at the correct locations.

Are side splashes included with SCRUB-WARE Scrub Sinks models?

Based on the product data for the listed SCRUB-WARE Scrub Sinks models (SKU 45ND43, 45ND44, 45ND41, and 45ND42), side splashes are not included. If wall protection is required, side splashes must be specified separately. The absence of side splashes means that adjacent wall surfaces may be exposed to water during use, so additional protection may be needed in wet environments. When planning installation, consider the wall finish and whether splash protection is necessary to meet local codes or facility standards. 3G Electric can provide guidance on compatible accessories if needed.

What does AC powered mean for SCRUB-WARE wash stations?

For SCRUB-WARE wash stations, AC powered indicates that the unit requires an electrical connection to operate. The specific function of the electrical components depends on the model, but it may include integrated lighting, sensor-operated faucets, or other features. Because these units require AC power, an electrical rough-in must be coordinated with the plumbing rough-in during installation. The exact voltage and amperage requirements should be verified from the manufacturer's specification sheet for each model. 3G Electric can provide the relevant electrical data for the SCRUB-WARE models in its catalog to assist with project planning.