Pneumatics

Tech Support

Quote Response

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Page 22 of 69

BrandSPEEDAIRE

BrandROBOHAND

BrandSPEEDAIRE

BrandAIGNEP USA

BrandSPEEDAIRE

Pneumatics

SMC Air Cylinder Sensor Mounting Hardware: Fits 20 mm Bore Dia

SPEEDAIRE Single Rear Clevis: Clevis, Fits 40 mm Bore Dia, 51 mm Overall Lg, Steel

SMC Parallel Gripper: 2 mm Stroke Lg, 29 psi to 87 psi, 87 psi Max Op Pressure

ARO Attachable Mounting Kit: Attachable Mounting Kit, Clevis, Fits 2 in Bore Dia

SMC Air Gripper: 22 mm Stroke Lg, 14.5 psi to 101.5 psi, 101.5 psi Max Op Pressure

SMC Knuckle Joint: Clevis, Fits 0.79 mm Bore Dia, M18 x 1.5 Thread Size, Y-05M

SMC Flow Control Valve: Elbow Fitting, Screwdriver Slot, 1/4 in/1/8 in Valve Body Size

SMC Stroke Adjuster: Mfr Part # MXS-BT8, MXS Series

ROBOHAND Feed Escapement: 5/8 in Stroke Lg, 40 psi to 100 psi, 100 psi Max Op Pressure

SMC Air Slide Table: 40 mm Stroke Lg, 25 mm Bore Dia, Mfr Part # MXS25-40, MXS Series

SMC Inline Solid Trimmer: D-RPK, Amplifier, PNP, IP40/IP67, 0.5 m Lead Lg (ft)

SMC Speed Control Valve: In-Line Fitting, Hex Screw, 1/2 in Valve Body Size

SPEEDAIRE Nose Thread Nut: Threaded Nut Mount Type, 7/16 in Overall Wd, 1 5/16 in Overall Ht

SMC Parallel Gripper: 4 mm Stroke Lg, 36 psi to 101 psi, 101 psi Max Op Pressure

SMC Air Cylinder: 50 mm Bore Dia, 145 MPa Max Op Pressure, 1/4 in Rc, Rubber Cushion

SMC Air Gripper: 15 psi to 87 psi, 87 psi Max Op Pressure, 15 psi Min Op Pressure

AFAG Stop: Mfr Part # 50046516

SMC Angular Air Gripper: 22 psi to 101 psi, 101 psi Max Op Pressure, 22 psi Min Op Pressure

SMC Mounting Bracket: Clevis, Fits 32 mm Bore Dia, 45 mm Overall Lg

SMC Stroke Adjuster: Mfr Part # MXS-BS12, MXS Series

SMC Rotary Air Actuator: Single Vane Actuator, 90° Rotation Angle, 32 in-lb Output Torque

SMC Air Cylinder Sensor Mounting Hardware: Fits 32 mm Bore Dia, Nylon

SMC Speed Control Valve: Elbow Fitting, Knob, 1/4 in/1/8 in Valve Body Size

SMC Autoswitch Carriage: BJ3-1, Mounting Adaptor

SMC Speed Control Valve: Elbow Fitting, Knob, 1/4 in/1/8 in Valve Body Size

SMC Air Cylinder: 32 mm Bore Dia, 145 MPa Max Op Pressure, 1/8 in Rc, Rubber Cushion

AIGNEP USA Universal Flow Control: Elbow Fitting, Screwdriver Slot

Parker Round Air Cylinder: 1 1/16 in Bore, 2 in Stroke, Non-Repairable, Stainless Steel

SMC Mounting Bracket: Flange/Foot Mount Type, Fits 80 mm Bore Dia, Stainless Steel

VEKTEK Parallel Gripper: 160 Nominal Size, Anodized Aluminum Alloy, VGP/VZP

SMC Air Cylinder Sensor Mounting Hardware: Fits 32 mm Bore Dia, Nylon, BGS1-032S

LEGRIS Compact Flow Control: Elbow Fitting, Screw, 12 mm Valve Body Size, 12 mm Tube

SMC Inline Solid PNP Direct: D-M9PWMAPC, Inline Solid State Auto Switch, M8-3Pin

VEKTEK End of Arm Tooling: 4 mm Stroke Lg, 2.5 bar to 8 bar, 8 bar Max Op Pressure

SMC Speed Control Valve: Elbow Fitting, Screw, 3/8 in Valve Body Size

Parker Replacement Kit: Mfr Part # SKS12LP501, Fits 1.125 in Bore Dia

SMC Speed Controller: In-Line Fitting, Knob, 1/2 in Valve Body Size

SMC Inline Reed Auto Switch: D-A73H, Inline Reed Auto Switch, IP67, 100 V AC/24 V DC

SMC Foot Bracket: Foot Mount Type, Fits 25 mm Bore Dia, Stainless Steel

SMC Floating Joint: SMC JC Series, JC30-10-125, Aluminum, M10 x 1.25 Thread Size

SMC Auto Switch Mounting Screw: NBM2-125A. Key specifications — attr947346: NBM2-125A.

SMC Inline Solid 2 Wire Band: D-H7BASDPC, Inline Solid State Auto Switch, M12-4Pin

SMC Perpendicular Solid 2 Wire Rail: D-J79C, Perpendicular Solid State Auto Switch

SMC Stroke Adjuster, Retract: Mfr Part # MXQ-AT16

SPEEDAIRE Rear Flange Mounting Kit: Flange, Fits 1 1/2 in Bore Dia

SMC Power Clamp Cylinder: 80 mm Bore Dia, Steel, CKZ2N, NPT, Turck

SMC Round Body Cylinder: 16 mm Bore, 50 mm Stroke, Non-Repairable, Stainless Steel

Parker Replacement Kit: 4MA