EXW Singapore — collect or forward from our Singapore office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up

MICROSHIELD

MICROSHIELD is a brand of air filtration products centered on zero-bypass minipleat filter construction. The product line supplied by 3G Electric consists of minipleat air filters that use synthetic media and are rated MERV 15. These filters are built with either plastic or chip board frames, and are available in configurations with or without a single header. The zero-bypass design is intended to reduce air leakage around the filter media, directing airflow through the pleated synthetic media rather than past the frame. This construction is used in commercial and industrial HVAC systems where fine particulate filtration is required. The filters are available in nominal face dimensions including 12 in x 24 in, 16 in x 20 in, 20 in x 20 in, 20 in x 25 in, and 24 in x 24 in, with depths of 2 in or 4 in. Header options include single-header and no-header variants, and frame materials include plastic and chip board. The MERV 15 rating indicates the filters capture a defined percentage of particles in the 0.3 to 10 micrometer range, making them suitable for applications that need higher-efficiency filtration than standard pleated filters. 3G Electric supplies MICROSHIELD zero-bypass minipleat air filters as part of its industrial equipment catalog. The available SKUs cover multiple size, frame, and header combinations, allowing specifiers to match replacement filters to existing filter racks and HVAC system requirements. 3G Electric provides logistics support for these products, including international shipping, and can assist with identifying the correct part number based on dimensions, frame material, and header configuration. For procurement and maintenance teams, the key selection variables are nominal size, depth, frame material, and whether a single header is required. The synthetic media is used across the line, and the MERV 15 rating is consistent across the listed SKUs. The filters are intended for use in commercial and industrial HVAC systems, including applications where fine airborne particles must be captured to protect downstream equipment or maintain indoor air quality. Because the filters are zero-bypass, they are often specified in systems where filter bypass would reduce overall filtration efficiency. The product family includes both plastic-framed and chip board-framed options, which may be selected based on the filter housing design and the required structural rigidity. 3G Electric maintains inventory and can quote multiple SKUs, including MP4H15P-2424, MP215-2424-ZB, MP415P-2424, MP215-1224-ZB, MP415-2424, MP415-2020, MP415P-1620, and MP415-2025. These part numbers correspond to specific size, frame, and header combinations. The brand is positioned as a source for minipleat filtration products that meet MERV 15 performance criteria, and 3G Electric supports the line with product data, specification matching, and order fulfillment.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
EXW Singapore
Collect or forward from our office
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Show
Page 1 of 1

About MICROSHIELD

MICROSHIELD is a brand of air filtration products centered on zero-bypass minipleat filter construction. The product line supplied by 3G Electric consists of minipleat air filters that use synthetic media and are rated MERV 15. These filters are built with either plastic or chip board frames, and are available in configurations with or without a single header. The zero-bypass design is intended to reduce air leakage around the filter media, directing airflow through the pleated synthetic media rather than past the frame. This construction is used in commercial and industrial HVAC systems where fine particulate filtration is required. The filters are available in nominal face dimensions including 12 in x 24 in, 16 in x 20 in, 20 in x 20 in, 20 in x 25 in, and 24 in x 24 in, with depths of 2 in or 4 in. Header options include single-header and no-header variants, and frame materials include plastic and chip board. The MERV 15 rating indicates the filters capture a defined percentage of particles in the 0.3 to 10 micrometer range, making them suitable for applications that need higher-efficiency filtration than standard pleated filters. 3G Electric supplies MICROSHIELD zero-bypass minipleat air filters as part of its industrial equipment catalog. The available SKUs cover multiple size, frame, and header combinations, allowing specifiers to match replacement filters to existing filter racks and HVAC system requirements. 3G Electric provides logistics support for these products, including international shipping, and can assist with identifying the correct part number based on dimensions, frame material, and header configuration. For procurement and maintenance teams, the key selection variables are nominal size, depth, frame material, and whether a single header is required. The synthetic media is used across the line, and the MERV 15 rating is consistent across the listed SKUs. The filters are intended for use in commercial and industrial HVAC systems, including applications where fine airborne particles must be captured to protect downstream equipment or maintain indoor air quality. Because the filters are zero-bypass, they are often specified in systems where filter bypass would reduce overall filtration efficiency. The product family includes both plastic-framed and chip board-framed options, which may be selected based on the filter housing design and the required structural rigidity. 3G Electric maintains inventory and can quote multiple SKUs, including MP4H15P-2424, MP215-2424-ZB, MP415P-2424, MP215-1224-ZB, MP415-2424, MP415-2020, MP415P-1620, and MP415-2025. These part numbers correspond to specific size, frame, and header combinations. The brand is positioned as a source for minipleat filtration products that meet MERV 15 performance criteria, and 3G Electric supports the line with product data, specification matching, and order fulfillment.

Common Applications

  • Commercial HVAC systems — MICROSHIELD zero-bypass minipleat filters (e.g., MP415P-2424) for MERV 15 filtration in air handling units.
  • Industrial air filtration — MICROSHIELD minipleat filters with chip board frames (e.g., MP415-2020) for fine particle capture in manufacturing areas.
  • Healthcare facilities — MICROSHIELD MERV 15 minipleat filters (e.g., MP215-2424-ZB) to reduce airborne particulates in patient care spaces.
  • Data centers — MICROSHIELD zero-bypass filters (e.g., MP4H15P-2424) to protect cooling equipment from particulate contamination.
  • Pharmaceutical production — MICROSHIELD minipleat filters (e.g., MP415-2025) for high-efficiency filtration in controlled environments.
  • Food processing plants — MICROSHIELD MERV 15 filters (e.g., MP415P-1620) to maintain air quality in production and packaging areas.

Frequently asked questions

Common questions about MICROSHIELD from 3G Electric.

What is a MICROSHIELD zero-bypass minipleat air filter?

A MICROSHIELD zero-bypass minipleat air filter is a filter that uses closely spaced pleats of synthetic media in a frame designed to minimize air bypass around the media. The zero-bypass construction forces air through the filter media rather than allowing it to leak between the media pack and the frame. These filters are rated MERV 15 and are available with plastic or chip board frames, with or without a single header. They are used in commercial and industrial HVAC systems for fine particulate filtration.

What MERV rating do MICROSHIELD minipleat filters have?

The MICROSHIELD zero-bypass minipleat air filters listed by 3G Electric are rated MERV 15. MERV 15 filters capture a high percentage of particles in the 0.3 to 10 micrometer range, including fine dust, smoke, and other airborne particulates. This rating makes them suitable for applications requiring higher efficiency than standard MERV 8 or MERV 13 pleated filters. The MERV 15 rating is consistent across the SKUs supplied, including both plastic-framed and chip board-framed versions.

What sizes are available for MICROSHIELD zero-bypass minipleat air filters?

MICROSHIELD zero-bypass minipleat air filters are available in several nominal face sizes and depths. The sizes supplied by 3G Electric include 12 in x 24 in x 2 in, 16 in x 20 in x 4 in, 20 in x 20 in x 4 in, 20 in x 25 in x 4 in, 24 in x 24 in x 2 in, and 24 in x 24 in x 4 in. Depth options are 2 in and 4 in. Frame material and header configuration vary by SKU. When selecting a replacement, confirm the existing filter's nominal dimensions, depth, frame type, and header requirement.

What is the difference between a single-header and no-header MICROSHIELD minipleat filter?

A single-header MICROSHIELD minipleat filter has a header frame on one face, which provides a sealing surface and can help with installation in certain filter housings. A no-header filter does not have this extra frame, so it relies on the filter's own frame for sealing. The choice depends on the filter rack or housing design. For example, SKU 809KP4 (MP4H15P-2424) is a single-header model, while SKU 809KN6 (MP415P-2424) is a no-header model. Both are MERV 15 and use synthetic media.

What frame materials are used in MICROSHIELD minipleat air filters?

MICROSHIELD zero-bypass minipleat air filters are available with plastic frames or chip board frames. Plastic frames provide a rigid, moisture-resistant structure, while chip board frames are a common option for dry HVAC applications. The media material is synthetic in all listed SKUs. Examples include SKU 809KP4 with a plastic frame and single header, and SKU 809KM8 with a chip board frame and no header. The frame material should be selected based on the operating environment and the filter housing.

Where are MICROSHIELD minipleat air filters used?

MICROSHIELD zero-bypass minipleat air filters are used in commercial and industrial HVAC systems for high-efficiency particulate filtration. Typical applications include office buildings, manufacturing facilities, hospitals, and other spaces where fine airborne particles must be controlled. The MERV 15 rating makes them suitable for protecting downstream equipment and maintaining indoor air quality. They can be used as final filters or as prefilters in multi-stage filtration systems, depending on the overall design and target efficiency.