We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric

EZ WRAP 'N STOR

EZ WRAP 'N STOR is a brand of reusable hook-and-loop cable management products. The line is built around two primary configurations: cinch straps with an integrated handle for tool-free tightening and release, and grommet-mount ties that secure bundles to panels or surfaces via a mounting hole. All items in the range use a hook-and-loop closure system, allowing repeated opening and re-closing without the waste associated with single-use nylon cable ties. The ties are supplied in red, a color that aids visual identification in dense wire runs. Standard width across the sampled range is 1.5 inches, with maximum bundle diameters of 3.00 inches and 5.00 inches depending on the model. Lengths vary by configuration: the handle-equipped cinch strap is 12 inches long, while grommet-mount versions are available in 4-inch and 10-inch lengths. These dimensions make the ties suitable for organizing low- to medium-density cable bundles, pneumatic lines, and flexible hoses in control panels, machinery, and enclosure interiors. The hook-and-loop material is typically a nylon or polyester blend, though specific substrate details are not published in the product data. The grommet mount is a metal or plastic eyelet that accepts a screw, rivet, or bolt for permanent attachment to a surface, while the strap itself remains adjustable. The handle on the cinch strap provides a grip point for tensioning, which can be useful where gloves are worn or where access is restricted. 3G Electric supplies the EZ WRAP 'N STOR line as part of its broader industrial equipment catalog. The distributor stocks multiple SKUs, including the 48GR80 handle cinch strap, the 48GR82 4-inch grommet mount tie, and the 48GR81 10-inch grommet mount tie. Because 3G Electric operates globally, buyers can source these items alongside other industrial components without regional restrictions. The product data available to 3G Electric includes width, length, maximum bundle diameter, color, and mounting type, which allows procurement and maintenance teams to match the tie to the specific bundle size and attachment method required. For plant engineers and maintenance managers, the reusable nature of these ties supports routine reconfiguration of cable runs during equipment upgrades or troubleshooting. Unlike one-piece nylon ties, hook-and-loop ties can be opened and reclosed many times, which reduces the need to cut and replace fasteners. The grommet-mount variants are intended for fixed routing points where the bundle must be held against a panel or frame. The handle variant is intended for applications where the bundle is frequently accessed or where the tie must be cinched tight by hand. 3G Electric provides these products with the technical specifications needed for cross-referencing and procurement, and can supply quotes for volume orders or mixed-carton quantities. The brand does not publish IP ratings, temperature ratings, or flammability certifications for these specific SKUs in the available data, so buyers with those requirements should request additional documentation. The focus of the line is straightforward: reusable, adjustable cable and hose bundling with two mounting options and a limited set of bundle diameter capacities.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Show
Page 1 of 1

About EZ WRAP 'N STOR

EZ WRAP 'N STOR is a brand of reusable hook-and-loop cable management products. The line is built around two primary configurations: cinch straps with an integrated handle for tool-free tightening and release, and grommet-mount ties that secure bundles to panels or surfaces via a mounting hole. All items in the range use a hook-and-loop closure system, allowing repeated opening and re-closing without the waste associated with single-use nylon cable ties. The ties are supplied in red, a color that aids visual identification in dense wire runs. Standard width across the sampled range is 1.5 inches, with maximum bundle diameters of 3.00 inches and 5.00 inches depending on the model. Lengths vary by configuration: the handle-equipped cinch strap is 12 inches long, while grommet-mount versions are available in 4-inch and 10-inch lengths. These dimensions make the ties suitable for organizing low- to medium-density cable bundles, pneumatic lines, and flexible hoses in control panels, machinery, and enclosure interiors. The hook-and-loop material is typically a nylon or polyester blend, though specific substrate details are not published in the product data. The grommet mount is a metal or plastic eyelet that accepts a screw, rivet, or bolt for permanent attachment to a surface, while the strap itself remains adjustable. The handle on the cinch strap provides a grip point for tensioning, which can be useful where gloves are worn or where access is restricted. 3G Electric supplies the EZ WRAP 'N STOR line as part of its broader industrial equipment catalog. The distributor stocks multiple SKUs, including the 48GR80 handle cinch strap, the 48GR82 4-inch grommet mount tie, and the 48GR81 10-inch grommet mount tie. Because 3G Electric operates globally, buyers can source these items alongside other industrial components without regional restrictions. The product data available to 3G Electric includes width, length, maximum bundle diameter, color, and mounting type, which allows procurement and maintenance teams to match the tie to the specific bundle size and attachment method required. For plant engineers and maintenance managers, the reusable nature of these ties supports routine reconfiguration of cable runs during equipment upgrades or troubleshooting. Unlike one-piece nylon ties, hook-and-loop ties can be opened and reclosed many times, which reduces the need to cut and replace fasteners. The grommet-mount variants are intended for fixed routing points where the bundle must be held against a panel or frame. The handle variant is intended for applications where the bundle is frequently accessed or where the tie must be cinched tight by hand. 3G Electric provides these products with the technical specifications needed for cross-referencing and procurement, and can supply quotes for volume orders or mixed-carton quantities. The brand does not publish IP ratings, temperature ratings, or flammability certifications for these specific SKUs in the available data, so buyers with those requirements should request additional documentation. The focus of the line is straightforward: reusable, adjustable cable and hose bundling with two mounting options and a limited set of bundle diameter capacities.

Common Applications

  • Control panels and electrical enclosures — EZ WRAP 'N STOR grommet mount ties (48GR82, 48GR81) secure wire bundles to backplates or side walls.
  • Machinery and production equipment — EZ WRAP 'N STOR handle cinch strap (48GR80) allows tool-free adjustment of cable and hose bundles during maintenance.
  • Pneumatic and hydraulic hose routing — EZ WRAP 'N STOR 10-inch grommet mount tie (48GR81) bundles hoses up to 5.00 inches in diameter along frames.
  • Temporary or reconfigurable setups — EZ WRAP 'N STOR reusable ties support frequent opening and re-closing without cutting or replacing fasteners.
  • Panel building and retrofit projects — EZ WRAP 'N STOR 4-inch grommet mount tie (48GR82) organizes small cable bundles up to 3.00 inches in diameter.
  • Maintenance carts and tool storage — EZ WRAP 'N STOR handle cinch strap (48GR80) keeps cables and cords bundled for transport and storage.

Frequently asked questions

Common questions about EZ WRAP 'N STOR from 3G Electric.

What is the difference between the EZ WRAP 'N STOR handle cinch strap and the grommet mount ties?

The handle cinch strap (e.g., SKU 48GR80) has an integrated handle that allows the user to tension and release the hook-and-loop closure by hand without tools. It is 12 inches long and 1.5 inches wide, with a maximum bundle diameter of 3.00 inches. The grommet mount ties (e.g., SKU 48GR82 and 48GR81) have a metal or plastic eyelet that accepts a screw, rivet, or bolt for attaching the tie to a panel or surface. They are available in 4-inch and 10-inch lengths, both 1.5 inches wide, with maximum bundle diameters of 3.00 inches and 5.00 inches respectively. The choice depends on whether the bundle needs to be frequently adjusted (handle) or fixed to a surface (grommet).

What is the maximum bundle diameter for EZ WRAP 'N STOR hook-and-loop cable ties?

The maximum bundle diameter varies by model. The 48GR80 handle cinch strap and the 48GR82 4-inch grommet mount tie both accommodate bundles up to 3.00 inches in diameter. The 48GR81 10-inch grommet mount tie accommodates bundles up to 5.00 inches in diameter. These figures represent the largest bundle the tie can wrap around and still close securely. For bundles near the maximum diameter, ensure the hook-and-loop surfaces have sufficient overlap for a reliable hold. If the bundle is smaller than the maximum, the tie can be cinched tighter, but excess strap length may need to be managed or trimmed if the design allows.

Are EZ WRAP 'N STOR cable ties reusable?

Yes. All EZ WRAP 'N STOR ties in the sampled range are reusable. The hook-and-loop closure can be opened and reclosed multiple times without losing holding strength, provided the surfaces are kept free of debris. This contrasts with single-use nylon cable ties, which must be cut to remove and cannot be reused. The reusable design is useful in applications where cable bundles are frequently modified, such as during equipment maintenance, panel upgrades, or temporary setups. The grommet mount ties can remain attached to the surface while the strap is opened and reclosed around the bundle. The handle cinch strap can be fully removed and repositioned as needed.

What color are EZ WRAP 'N STOR hook-and-loop ties and does color affect performance?

The EZ WRAP 'N STOR ties listed are red. Color does not affect the mechanical performance of the hook-and-loop closure or the strap material. Red is often chosen for visibility in cable management, making it easier to identify specific bundles or routing paths in panels and enclosures. If color-coding is part of your wire management scheme, red can serve as one category. Other colors may be available in the broader line, but the sampled SKUs are red. For applications requiring UV resistance or specific colorfastness, consult the manufacturer's data, as those properties are not specified in the available product information.

Can EZ WRAP 'N STOR grommet mount ties be used outdoors?

The available product data does not specify UV resistance, temperature range, or weather resistance for EZ WRAP 'N STOR grommet mount ties. Hook-and-loop fasteners are generally sensitive to prolonged UV exposure and moisture, which can degrade the hook-and-loop material over time. For outdoor applications, it is advisable to confirm with the manufacturer whether the specific SKU is rated for outdoor use. If no rating is provided, consider using the ties in protected locations or selecting a different product designed for environmental exposure. The grommet itself may be metal or plastic; metal grommets can corrode in wet conditions unless plated or coated.

What widths are available for EZ WRAP 'N STOR cable ties?

The EZ WRAP 'N STOR cable ties in the sampled range are all 1.5 inches wide. This width provides a broad contact area for the hook-and-loop closure, which can help distribute holding force across the bundle. Wider ties are generally better for heavier bundles or where more holding strength is needed, while narrower ties are more flexible for tight spaces. The 1.5-inch width is consistent across the handle cinch strap and the grommet mount ties. If your application requires a different width, check the full EZ WRAP 'N STOR catalog or contact 3G Electric for available options, as the sampled SKUs do not cover the entire line.