EBM

The EBM standard square axial fan operates on 115V AC and delivers 270 cfh airflow at 0.000 in static pressure. It features steel blades and aluminum construction, with a plug-in connection and an included grounding lug. The fan has a height of 5 5/16 inches and a depth of 1 1/2 inches. This model is suitable for cooling and ventilation in equipment where a compact, square form factor is required. The steel blade material provides durability, while the aluminum housing aids heat dissipation. The plug-in connection simplifies installation and replacement. The grounding lug ensures electrical safety compliance. This fan is part of EBM's standard square axial fan series, which is used in various industrial and commercial applications.

The EBM 700-00 series digital differential static pressure transducer offers ±1.00% accuracy and an IP54 rating. It is designed for wall mounting with a bottom process connection featuring a 5 mm smooth barb. The IP54 rating indicates protection against dust and water splashes, making it suitable for environments where moderate contamination may occur. The ±1.00% accuracy ensures reliable pressure measurement for monitoring and control tasks. This transducer is part of the 700-00 series, which includes models with various pressure ranges and output options. The wall-mount design allows for easy installation on panels or walls, and the bottom connection provides accessibility for tubing. The 5 mm smooth barb is compatible with standard flexible tubing used in pneumatic and HVAC systems.

EBM axial fans, such as the standard square axial fan, use steel blades and aluminum construction. Steel blades offer resistance to deformation and wear, which is important in continuous-duty applications. Aluminum housings are lightweight and provide good thermal conductivity, helping to dissipate heat generated by the motor. These material choices affect the fan's durability, weight, and operating temperature range. For technical buyers, the combination of steel and aluminum means the fan can withstand typical industrial environments without excessive corrosion or fatigue. The materials also influence the fan's balance and vibration characteristics, which impact noise and bearing life. When specifying a fan, engineers should consider the operating environment and required lifespan. EBM's use of these materials is consistent across the standard square axial fan series.

The EBM 700-00 series differential pressure transducer features a bottom process connection with a 5 mm smooth barb. This barb accepts standard flexible tubing, which is then connected to the pressure source. The transducer is wall-mounted, so the process connection is located at the bottom of the unit, allowing tubing to be routed downward. Electrical connections are made via terminals or cables, depending on the model. The transducer outputs a digital signal proportional to the differential pressure. For installation, the 5 mm barb provides a secure fit for tubing without additional fittings. This design simplifies setup and reduces potential leak points. The IP54 rating means the transducer can be installed in areas where occasional splashes or dust are present, but it is not intended for immersion or high-pressure washdown.

EBM differential pressure transducers, such as the 700-00 series, are commonly used to measure pressure differences in HVAC systems, cleanrooms, and industrial processes. They can monitor filter loading, fan performance, and room pressurization. The ±1.00% accuracy and IP54 rating make them suitable for environments where precise, reliable measurements are needed. In HVAC, they help maintain proper airflow and detect clogged filters. In cleanrooms, they ensure positive or negative pressure relative to adjacent spaces. In industrial settings, they can be used for monitoring pneumatic systems or duct pressure. The wall-mount design and bottom connection facilitate installation in control panels or on walls near the measurement point. The digital output allows integration with building management systems or PLCs for automated control and alarms.

3G Electric supplies datasheets and technical specifications for EBM products, including axial fans and differential pressure transducers. These documents include electrical ratings, airflow data, accuracy figures, and dimensional drawings. For the standard square axial fan, the datasheet lists voltage, airflow, static pressure, and connection type. For the 700-00 series transducer, it provides accuracy, pressure range, and process connection details. This information helps engineers verify compatibility with their systems. 3G Electric also offers logistics support for global delivery, ensuring that EBM components reach customers in various regions. While 3G Electric does not manufacture EBM products, it maintains inventory and provides responsive service to technical buyers who require documented performance data and reliable supply.