AUTOMATION SYSTEMS INTERCONNECT

AUTOMATION SYSTEMS INTERCONNECT cam switches are available in 3-pole and 4-pole configurations, with a voltage rating of 600V AC. The models shown include momentary action types, such as the 4-pole changeover switch (MPN C0400011R) and the 3-pole enclosed motor disconnect switch (MPN C0400010R). These switches are designed for panel mounting and are used for changeover switching, motor control, and power distribution. The momentary action means the switch returns to its normal position when released, making it suitable for temporary or non-maintained switching operations. For maintained action or other pole counts, consult the full ASI catalog or contact 3G Electric for availability.

AUTOMATION SYSTEMS INTERCONNECT DIN rail-mount RJ45 network modules are available with 3, 6, and 9 ports. These modules are constructed of plastic and feature PCB-mounted rear termination. The ports are unnumbered and compatible with Cat5e Ethernet cables. They are designed for structured cabling termination inside industrial control panels, providing a compact way to route Ethernet connections. The modules mount on standard DIN rail and are part of ASI's line of interface components for panel builders. For specific port counts and part numbers, refer to the product listings or request a quote from 3G Electric.

The AUTOMATION SYSTEMS INTERCONNECT Ethernet panel interface (MPN RAI-SAC-102-B) is rated IP65. This rating indicates protection against dust ingress and water jets from any direction. The interface combines a 120V single AC receptacle with RJ45 data terminations in a single enclosure. It is used to provide power and network connections through a control panel wall while maintaining the enclosure's environmental seal. The aluminum construction and IP65 rating make it suitable for industrial environments where moisture and dust are present. For installation guidelines and compatibility, consult the technical documentation.

The AUTOMATION SYSTEMS INTERCONNECT DIN rail cutter (MPN ASI305001) has a maximum cutting length of 1 meter. It is designed to cut standard DIN rail, specifically the PR004-1M product number. This tool is used by panel builders and electricians to cut DIN rail to required lengths for panel assembly. The cutter provides a clean cut without deforming the rail, which is important for proper mounting of components. It is a manual tool intended for workshop or on-site use. For more information on compatible rail types and cutting capacity, refer to the product specifications.

Yes, AUTOMATION SYSTEMS INTERCONNECT offers cam switches specifically designed for motor disconnect applications. The 3-pole enclosed motor disconnect switch (MPN C0400010R) is rated 600V AC and features momentary action. This switch is used to temporarily disconnect motor circuits in industrial control panels. The momentary action means the switch must be held in position, which can be suitable for jogging or temporary operations. For maintained disconnect applications, other models may be available. Always verify the switch rating and action type against the specific motor and circuit requirements. 3G Electric can provide datasheets and support for selection.

AUTOMATION SYSTEMS INTERCONNECT DIN rail-mount RJ45 modules use PCB-mounted rear termination. This means the RJ45 ports are connected to a printed circuit board at the rear of the module, which then interfaces with the panel wiring. The modules are compatible with Cat5e Ethernet cables and feature unnumbered ports. The plastic housing is designed for DIN rail mounting. This termination style allows for a compact and organized cabling solution inside control panels. For wiring details and pinouts, refer to the manufacturer's documentation or contact 3G Electric for assistance.